EPOXIES
PERMAGARD 200
EPOXY KOTE
DESCRIPTION
PermaGard 200 is a high solids/low V.O.C. epoxy coating. It is a self-priming high build coating that combines excellent wetting, penetration, and adhesion along with maximum abrasion resistance. Ease of application using either conventional or airless spray equipment separates this product from other products used in heavy duty offshore splash zone applications. It is typically applied in two coats as a primer and finish coat. And, it is available in high temperature versions (PermaGard 200 HT) for applications where ambient and surface temperatures typically exceed 90oF (32oC).
* Product advantages include:
1. User friendly
2. Rust inhibitive
3. Low V.O.C.
4. Lead and chromate free
5. 1:1 mixing ratio
6. Hard, tough film
7. Long term flexibility
8. Excellent film build on edges, welds, etc.
9. Excellent wetting in pitted areas
10. Excellent recoating properties
* Under cooler conditions PermaGard 200 HT may be thinned as needed to achieve desired spray characteristics.
FIELD OF APPLICATION
PermaGard 200 was originally designed as a premium coating for immersion service and structural steel in an offshore environment. Throughout the years, it has been tested and proven unique and effective splash zone coating. Product applications include:
1. Boat bumpers and landings
2. Platform jacket sections
3. Jack-up legs and mats
4. Drilling rig hulls
5. Drill casings, risers, sumps, etc.
6. Other splash zone applications
SERVICE CONDITIONS
PermaGard 200 will withstand continuous dry heat of 180oF (82oC) and intermittent dry heat to 250oF (121oC). The color may change as these limits are approached, but the film will remain intact. For immersion in fresh or salt water, the continuous temperatures should not exceed 150oF (66oC). Do not use for potable water. For further information, see application/service limitations. PermaGard 200 exhibits broad resistance to aggressive chemicals and severe marine environments.
Typical chemical resistance is as follows:
Exposure Immersion Splash & Spill Fumes
Acids Good Very Good Very Good
Alkalies Good Very Good Excellent
Solvents Good Very Good Excellent
Salt Water Excellent Excellent Excellent
Water Excellent Excellent Excellent
ULTRAGARD 201
ALL SEASON EPOXY
DESCRIPTION
UltraGard 201 is an all season epoxy with uncommonly high resin content for use in hot and cold temperature extremes. This two component, low V.O.C. self-riming epoxy coating exhibits excellent film build, penetration and adhesion to rusted metal, aged galvanizing, most existing paint systems and damp (not ripping) surfaces. It is suitable for use as a primer, intermediate, and finish coat or protection in fresh or salt water immersion.
Product advantages include:
1. User friendly
2. Rust inhibitive
3. Low V.O.C.
4. Lead and chromate free
5. 1:1 mixing ratio
6. Minimal surface preparation
7. Excellent film build on edges
8. Tolerates surface moisture during application.
9. Low temperature cure
10. Excellent film build on edges, welds, etc.
11. Excellent wetting in pitted areas
12. Hard, tough film
13. Long term flexibility
14. Excellent recoating properties
FIELD OF APPLICATION
UltraGard 201 is ideal for use as a primer, intermediate, and finish coat in heavy duty industrial or marine environments when coating operations must take place all year round. It is particularly useful for application to metal where surface preparation is limited to hand tool or power tool cleaning.
Product applications include:
1. Offshore structures
2. Drilling rigs
3. Storage tanks and pipelines
4. Refineries and chemical plants
5. Marine vessels
6. Pulp and paper mills
7. Heavy equipment
8. Industrial machinery
SERVICE CONDITION
UltraGard 201 will withstand continuous dry heat of 250oF (121oC) and intermittent dry heat to 300oF (149oC). The color may change as these limits are approached, but the film will remain intact. For immersion in fresh or salt water, the continuous temperatures should not exceed 125oF (52oC). Do not use for potable water. UltraGard 201 exhibits broad resistance to aggressive chemicals and severe marine environments. It is not recommended for exposure to strong acids, vigorous oxidizing solutions or immersion service in acids, alkalies or solvents.
Typical chemical resistance is as follows:
Exposure Immersion Splash & Spill Fumes
Acids NR Good Very Good
Alkalies NR Very Good Excellent
Solvents NR Very Good Excellent
Salt Water Excellent Excellent Excellent
Water Excellent Excellent Excellent
ULTRAGARD 202
ALL SEASON ALUMINUM EPOXY MASTIC
DESCRIPTION
UltraGard 202 is a rust-inhibitive modified aluminum epoxy mastic for year round application. This premium quality, V.O.C. compliant, self-priming epoxy coating exhibits excellent penetration and adhesion to rusted surfaces, aged galvanized steel, and most existing paint systems. Suitable for use as a primer or intermediate coat, it provides ultimate protection under most adverse application conditions.
Product advantages include:
1. Excellent elevated temperature pot life
2. Low temperature cure
3. Urethane free
4. Rust inhibitive
5. Low V.O.C.
6. Lead and chromate free
7. 1:1 mixing ratio
8. Hard, tough film
9. Long term flexibility
10. Minimal surface preparation
11. Self-priming
12. Excellent application Characteristics
13. Excellent film build on edges, etc.
FIELD OF APPLICATION
UltraGard 202 is ideal for maintenance painting old rusted surfaces for upgrading old coatings in climates of hot and cold temperature extremes. It is particularly useful for application to metal where surface preparation is limited to hand tool or power tool cleaning. It is also suitable for use as a high build intermediate coat in aggressive industrial environments.
Product applications include:
1. Offshore structures
2. Drilling rigs
3. Storage tanks and pipelines
4. Refineries and chemical plants
5. Marine vessels
6. Pulp and paper mills
7. Heavy equipment
8. Industrial machinery
SERVICE CONDITIONS
UltraGard 202 will withstand continuous dry heat of 250oF (121oC) and intermittent dry heat of 300oF (149oC). The color may change as these limits are approached, but the film will remain intact. For immersion in fresh or salt water, the continuous temperature should not exceed 150oF (66oC). Do not use for potable water. UltraGard 202 exhibits broad resistance to aggressive chemicals and severe marine environments. It is not recommended for exposure to strong acids, vigorous oxidizing solutions or immersion service in acids, alkalies or solvents.
Typical chemical resistance is as follows:
Exposure Immersion Splash & Spill Fumes
Acids NR Good Very Good
Alkalies NR Very Good Excellent
Solvents NR Very Good Excellent
Salt Water Excellent * Excellent Excellent
Water Excellent * Excellent Excellent
* Discolors to gray
ULTRAGARD 205
SAF-T-GRIP DECK KOTE
DESCRIPTION
UltraGard 207 is a fast dry all season epoxy coating formulated to allow for multiple coats to be applied in the same day. A premium high solids/ low VOC epoxy, it is suitable as a primer, intermediate, or finish coat, if desired. It has excellent penetration and adhesion to rusted surfaces, aged galvanized and most existing paint systems in both hot and cold temperatures.
Product advantages include:
1. Fast Dry/Cure
2. Rust inhibitive
3. User friendly
4. Low V.O.C.
5. 1:1 mixing ratio
6. Long term flexibility
7. Hard, tough film
8. Minimal surface preparation
9. Excellent recoating properties
10. Lead and chromate free colors available
11. Low temperature cure
12. Excellent elevated temperature pot life
DESCRIPTION
PermaGard 211 Patching Compound is a 100% solids epoxy putty for patching holes, gouges, or other surface imperfections prior to painting. PG 211 is also formulated to be applied and cure underwater in both fresh and salt water.
FIELD OF APPLICATION
Wormholes, weld seams, other surface irregularities on waterlines, underwater, piping pilings, etc.
PERMAGARD 213
HI -SOLIDS EPOXY
DESCRIPTION
PermaGard 213 is an economical, general purpose epoxy coating suitable as a primer, intermediate, or finish coat, as desired. A high solids/low V.O.C. epoxy that cures to a tough and abrasion resistant film. It has excellent adhesion, recoating, and top coating properties. PermaGard 213 has been optimized for dry film in the range of 5.0 - 7.0 mils per coat.
Product advantages include:
1. Excellent corrosion protection
2. Economical
3. User friendly
4. Low V.O.C
5. 1:1 mixing ratio
6. Long term flexibility
7. Hard, tough film
8. Minimal surface preparation
9. Lead and chromate free
10. Excellent recoating properties
DESCRIPTION
PermaGard 214 is an economical, general purpose epoxy coating that cures in cold temperatures allowing for year round coating operations. Suitable as a primer, intermediate, or finish coat, it is a high solids. V.O.C. compliant epoxy that cures to a tough, abrasion resistant film. Having been formulated for dry films in the range of 5.0 - 7.0 mils per coat, it also has excellent adhesion, recoating, and top coating properties.
Product advantages include:
1. Low temperature cure
2. Excellent corrosion protection
3. User friendly
4. Low V.O.C.
5. Excellent recoating properties
6. 1:1 mixing ratio
7. Lead and chromate free
8. Long term flexibility
9. Minimal surface preparation
10. Economical
DESCRIPTION
PermaGard 208 is a premium quality high solids/low V.O.C. high build epoxy coating that is suitable as a primer, intermediate, and finish coat, if desired. It has excellent penetration and adhesion to rusted surfaces, aged galvanizing and most existing paint systems. It is a generic version of Esgard's successful PermaGard 200 Epoxy Kote and has been optimized for dry films in the range of 5.0 - 7.0 mils per coat.
Product advantages include:
1. Rust inhibitive
2. Hard, tough film
3. User friendly
4. Low V.O.C. 5. 1:1 mixing ratio
6. Long term flexibility
7. Minimal surface preparation
8. Lead and Chromate free
9. Excellent recoating properties
DESCRIPTION
UltraGard 205 Saf-T-Grip Deck Kote is a premium quality 100% solids, rust inhibitive, non-skid epoxy coating for light to heavy duty service on steel, aluminum, concrete and other rigid surfaces. It has a high build epoxy coating that has excellent adhesion to properly prepared surfaces and has extreme impact and abrasion resistant properties.
Product advantages include:
1. Rust-inhibitive
2. Incorporates S-T-G particle grit
3. 0 V.O.C
4. Lead and chromate free
5. Provides excellent wet/dry slip resistance
6. Hard, tough film
7. Long term flexibility
8. May apply a topcoat
FIELD OF APPLICATION
UltraGard 205 is ideal as a safety coating for flat or diamond plate decks as well as high impact areas including helidecks and crane loading areas. It is also an effective non-skid coating for concrete floors.
Product applications include:
1. Offshore structures
2. Drilling rigs
3. Refineries and chemical plants
4. Warehouses
5. Marine vessels
SERVICE CONDITIONS
UltraGard 205 will withstand continuous dry heat of 250oF (121oC) and intermittent dry heat to 300oF (149oC). The color may change as these limits are approached, but the film will remain intact. UltraGard 205 exhibits broad resistance to aggressive chemicals and severe marine environments.
PERMAGARD 214
ALL SEASON EPOXY
PERMAGARD 250
COAL TAR EPOXY
DESCRIPTION
PermaGard 250 is a high solids/low V.O.C., self-priming coal tar epoxy suitable for all environments. PermaGard 250 is a two component coal tar epoxy with excellent adhesion to properly prepared surfaces, steel.